Avaya C360 Manager User Manual page 107

Sub-
The Sub-Interfaces tab of the Channel Group dialog box provides
Interfaces
information about the configuration of Frame Relay sub-interfaces in the
Channel Group.
To view the Sub-Interfaces tab of the Channel Group dialog box:
Avaya C360 Manager User Guide
Table 7-4. Channel Group Dialog Box -
Frame Relay Parameters (Continued)
Field
MTU (octets)
Last Fault Message
Time Since Fault
Backup Interface
1. Click a Channel Group icon in the Chassis View. A list of Channel
Groups on the port appears.
2. Click the Channel Group you want to configure. The Channel
Group dialog box opens with the Channel Group tab.
Description
The size (in octets) of the largest datagram
that can be sent via the interface.
The type of error last occurring on the
interface. Possible values are:
• Unknown Error
• Receive Short
• Receive Long
• Illegal Address
• Unknown Address
• DLCMI Protocol Error
• DLCMI Unknown IE
• DLCMI Sequence Error
• DLCMI Unknown Rpt
• No Error Since Reset
The amount of time the system was up before
the last error occurred.
The interface configured to back up the
selected interface.
WAN Configuration
93