Avaya C360 Manager User Manual page 252

Chapter 20
* Note: In the Send field, selecting '
You can modify RIP interfaces. For more information on editing tables,
refer to
238
Table 20-8. RIP Interface Parameters (Continued)
Field
Default Route Mode
Split Horizon
Auth Type
Auth Key
prevent updating the
"Editing Tables" on page
Description
If , accepts default route entries in RIP
talk-listen
messages received from other routes on this
interface. If , does not accept default
talk-only
route entries in RIP messages received from
other routes on this interface.
The method for handling routes learned from
this interface, when sending updates to this
interface. Possible methods are:
• Poisoned Reverse
advertised to this interface as unreachable.
• - The routes are not
Split Horizon
advertised to this interface at all.
• - The routes are advertised to this
None
interface as is.
Authentication Type. Possible methods are:
• None
• Simple
The password for this interface. This is only
used if the is set to
Auth Type
The password may contain up to 16 characters.
It may be configured here, but not viewed.
listen-only
Default Route Metric
213.
- The routes are
Simple-password
' or ' talk-listen ' will
field.
Avaya C360 Manager User Guide
.