Avaya C360 Manager User Manual page 102

Chapter 7
To configure the channels that comprise the Channel Group, check the
checkboxes next to the channels you want included in the Channel
Group. Uncheck the checkboxes next to the channels you want to
remove from the Channel Group.
* Note: Channels that belong to other Channel Groups appear gray
To configure the speed factor of the Channel Group, select a Channel
Group speed factor from the
PPP
The PPP tab of the Channel Groups dialog box provides configuration
information for the PPP interface of the selected Channel Group.
To view the PPP tab of the Channel Group dialog box:
88
3. Click . The Advanced tab of the Channel Group dialog
Advanced
box appears.
Figure 7-4. Channel Group Dialog Box - Advanced Tab
with the name of the Channel Group to which they belong.
These channels cannot be added to the selected Channel
Group.
1. Click a Channel Group icon in the Chassis View. A list of Channel
Groups on the port appears.
2. Click the Channel Group you want to configure. The Channel
Group dialog box opens with the Channel Group tab.
Speed Factor pull-down listbox.
Avaya C360 Manager User Guide