Avaya C360 Manager User Manual page 130

Chapter 7
116
Table 7-11. USP Dialog Box - Frame Relay Parameters (Continued)
Field
Oper Status
MTU (octets)
Last Fault Message
Time Since Fault
Description
The operational status of the interface.
Possible statuses include:
• Up - The interface is up and can transmit
and receive packets.
• Down - The interface is down due to
some failure, and cannot transmit or
receive packets.
• Testing - The interface is in testing mode
and cannot transmit or receive regular
data.
• Standby - The interface is a backup
interface and cannot transmit or receive
packets unless the primary interface it
backs up fails.
• Disabled - The interface is disabled. It
cannot transmit or receive packets.
• Partially Down - The interface is up.
However, some interfaces (or PVCs)
layered on top of this interface are Down.
Some packets can be transmitted and
received.
The size (in octets) of the largest datagram
that can be sent via the interface.
The type of error last occurring on the
interface. Possible values are:
• Unknown Error
• Receive Short
• Receive Long
• Illegal Address
• Unknown Address
• DLCMI Protocol Error
• DLCMI Unknown IE
• DLCMI Sequence Error
• DLCMI Unknown Rpt
• No Error Since Reset
The amount of time the system was up before
the last error occurred.
Avaya C360 Manager User Guide