Avaya C360 Manager User Manual page 240

Chapter 20
The following parameters are displayed:
226
Table 20-3. Routing Table Parameters
Field
Destination
Netmask
Next Hop
VLAN Name
(not for X330WAN)
L2 Interface Name
(X330WAN router
only)
Protocol
Leak Route
Cost
Permanent
(X330WAN router
only)
Description
The destination network IP address of this
route. An IP address of 0.0.0.0 denotes a default
router.
The destination network mask of this route.
The address of the next router of this route, via
which the destination of this route is reached.
The logical name of the local interface through
which the next hop of this route is reached.
The logical name of the local interface through
which the next hop of this route is reached.
The protocol through which the route was
learned. The following protocols can be
specified:
• Static - The route was manually configured
to this device.
• - The route represents a directly
Local
attached
net/subnet and corresponds to one of the
IP interfaces configured to this device.
• RIP - The entry was learned from the RIP
protocol.
• - The entry was learned from the
OSPF
OSPF protocol.
If checked, static entries are advertised by RIP
and OSPF. If unchecked, static entries are not
advertised.
Number of hops to the destination network, or
the cost of the route for OSPF routes.
The permanence status of the route. Possible
statuses are:
• Checked - The route is not disabled when
a link on the route is down.
• Unchecked - The route is disabled when a
link on the route is down.
Avaya C360 Manager User Guide