Virtual Server - Tenda G3 User Manual

Device Management
❺ Fill in a Username and Password for PPPoE authentication (In this example, zhangsan for both), check
Remember this password (R), and click Connect.
Wait a moment, and the dial-up is successful. If you want to go to the broadband connection interface, after
startup, find and click the network icon at the bottom right and then click Broadband Connection to normal
access the Internet.

4.10 Virtual Server

Virtual Server includes the following contents:
Port Forwarding: Allow Internet users to access Intranet resources.
UPnP: Automatically realize forwarding between WAN and LAN ports. It is recommended to keep default settings.
DMZ Host: Allows a computer in the Intranet to realize two-way unlimited communication with the Internet.
DDNS: Allow a changing WAN IP address of the router to establish a forwarding relation with a fixed domain name.
When performing remote access, the user needs only to access this domain name.
4.10.1 Port Forwarding
Overview
By default, the host in the WAN cannot actively access the host in the LAN. Port forwarding enables users in the
WAN to access the host in the LAN and protects the interior of the LAN against invasion. Port forwarding defines a
service port and uses an IP address to specify its corresponding LAN server. The router locates to this server the
service request on this port from the WAN.
Click 『Virtual Server』 to go to the Port Forwarding page.
- 104 -