Installation Notes - Tenda G3 User Manual

Device Installation

2.1 Installation Notes

Follow the following notes to avoid device damage or personal injury due to improper use.
2.1.1 Safety Measures
It is necessary to wear antistatic gloves in the installation process and the device must not be powered on.

Use the power cord in the product packaging box for power supply to the device.

Ensure that any input voltage range is consistent with the input voltage range indicated on the device.

Ensure that the installation location of the device is well ventilated.

Do not open or remove the device shell.

Do not cut off the power supply when cleaning the device. Do not use any liquid to scrub the device.

Keep the device away from power lines, electric lamps, power grids or any places where there is a potential

risk of touching a strong-current power grid.
Note
A tamper protection seal is attached to one installation screw on the device shell. When maintaining the device,
an agent must keep its seal intact. If you want to open the device shell, contact your local agent. Otherwise, you
are held liable provided that the device cannot be maintained due to unauthorized action.
2.1.2 Environmental Requirements

Temperature and humidity requirements
Environment description
Operating environment
Storage environment
 Cleanliness requirement
To avoid any electrostatic effect on normal action of the device, pay attention to the following: Keep room air
clean and regularly remove dust on the device. Perform correctly grounding of the device to ensure that static
electricity is transferred smoothly.
Temperature
0℃ ~ 40℃
-40℃ ~ 70℃
- 7 -
Humidity
10% - 90% RH (non-condensing)
5% - 90% RH (non-condensing)