Tenda G3 User Manual page 141

Device Management
4.12.6 Time & Date
Overview
This section describes how to set time & date of the router. Functions such as filter management of the router
may involve time settings. Therefore, time & date of the router must be correct to ensure that the rule is valid.
Click 『Maintenance』>『Time & Date』 to go to the configuration page.
This router supports Sync with the Internet and Custom setting methods.
Tip

The default method for obtaining time & date of the router is Sync with the Internet. After router
networking is successful, the router will automatically synchronize time for a time zone according to a time
calibration cycle.

After the router is shut down, time information will disappear. After the router is turned on and connected
to the Internet next time, the router will automatically obtain time for a time zone so that all settings about
time become valid.
- 135 -