Tenda G3 User Manual page 83

Device Management
Parameter description in the page:
Parameter
Enable
ARP Attack
Defense
Defense
ARP Broadcast Interval
ICMP Flood Threshold
UDP Flood Threshold
DDOS Defense
SYN Flood Threshold
IP Timestamp Option
IP Security Option
IP Stream Option
IP Attack
Defense
IP Record Route Option
IP Loose Source Route
Option
Illegal IP Option
Prohibit Ping After this item is enabled, other network devices in the network cannot ping a router WAN
WAN port successfully.
Description
ARP Attack
Enable/Disable the ARP attack defense function.
Time interval when the device sends ARP broadcast.
If a destination IP address receives ICMP request packets
exceeding a specified quantity within 1s, it is supposed that this
destination IP address is being attacked by ICMP Flood.
If a port of a destination IP address receives UDP packets
exceeding a specified quantity within 1s, it is supposed that this
port of this destination IP address is being attacked by UDP
Flood.
If a port of a destination IP address receives TCP SYN packets
exceeding a specified quantity within 1s, it is supposed that this
port of this destination IP address is being attacked by SYN
Flood.
Whether to check that IP packets from a specified area contain
the Internet Timestamp item.
Whether to check that IP packets from a specified area contain
the Internet Security item.
Whether to check that IP packets from a specified area contain
the Stream ID item.
Whether to check that IP packets from a specified area contain
the Record Route option.
Whether to check that IP packets from a specified area contain
the Loose Source option.
Whether to check the integrity or correctness of IP packets from
a specified area.
- 77 -