Faqs - Tenda G3 User Manual

Appendix

3 FAQs

Question 1: What to do in case of failure to go to the router management page after entering 192.168.0.252?
Answer: Please check the following aspects:
Ensure that the network cable is correctly connected and is not loose.

Confirm that the computer IP address is 192.168.0.X (X is 2-254 except 252).

Clear the browser cache or use other browsers to try.

Close the firewall or use other computers to try.

Confirm that no other devices in the LAN have an IP address of 192.168.0.252.

If login still fails after the above-mentioned operations, reset the device to factory defaults and log in

again.
Question 2: How to select a connection method?
Answer:
Connection Typical Broadband
Type Service Method
Telephone wire/Network
ADSL
cable
Dynamic
Wired TV/Network cable
IP
Network cable/Optical
Static IP
fiber
Question 3: How to reset the router to factory defaults in case of failure to log in to the router management
page?
Answer:
Press and hold the RESET button of the router with a spike for 8s and release it. Wait approximately 1 minute.
Reset parameters after the device are reset to factory defaults. The default login address of the router is
192.168.0.252. Log in again.
Question 4: How to do if a prompt message of "IP address conflicts with other systems in the network" appears
on the computer after the computer is connected to the router?
Answer:
❶ Ensure that there are no other DHCP servers or that other DHCP servers have been shut down.
Applicable Internet Access Characteristics
1. There is a username and password
2. Click broadband connection (
1. Connect a cable from the last router to access the Internet
2. Users who access the Internet by connecting a wired TV ( The Pearl
River Broadband, Wired Communication, and Topway)
There is a fixed IP address, subnet mask, default gateway, and DNS
server
- 152 -
) to dial up