Tenda G3 User Manual page 106

Device Management
Set host contents in the window that appears.

MAC Address: Enter a MAC address of a client that can access the Internet without any authentication.

Remark: Enter remark about this client (Optional).

Click OK.
After settings are finished, the page is shown in the figure below.
Step 2: Add a PPPoE user IP range (PPPoE user address IP to end IP) in the IP group. The default is 172.20.20.2 to
172.20.20.129. For detailed configuration steps, refer to Steps for adding an IP
- 100 -
group.