Tenda G3 User Manual page 111

Device Management
After a rule is successfully added, the page is shown in the figure below.
Parameter description in the page:
Parameter Description
Click this button to add a port forwarding rule.
Click this button to delete a selected port forwarding rule.
Intranet Host IP IP address of the Intranet server computer.
Intranet Port Service port of the Intranet server.
Extranet Port Router port open to Internet users to access.
Protocol type of a corresponding service. If you are uncertain of service protocol
Protocol
types during settings, you are recommended to select All.
WAN port for Intranet service forwarding, i.e. WAN port used when the Extranet
Line
accesses the Intranet server.
Status Status of this rule, including Enabled and Disabled.
Action Perform the enable/disable, edit, and delete actions on a rule.
- 105 -