Tenda G3 User Manual page 64

Device Management
Parameter description in the page:
Parameter
Status
Type
WAN
PPTP/L2TP Server
Encryption
IP Pool
Max
Connections
Username/Pa
ssword
Type
Network
PPTP/L2TP User
Subnet Mask
Remark
Action
4.5.3 IPSec
IPSec (IP Security) is the set of a series of services and protocols that protects end-to-end communication security
Description
Enable/Disable the PPTP/L2TP server function. After this function is
enabled, the router is used as a VPN server.
Type of server that the router acts as, including PPTP Server and L2TP
Server.
Router port where the PPTP/L2TP server is enabled. The IP address of this
port is "Server IP/Domain Name" information of the PPTP/L2TP client.
Whether to enable data encryption. Server settings shall be consistent
with client settings.
IP address field assigned to the PPTP/L2TP client by the server.
Maximum number of PPTP/L2TP clients that are allowed to be
connected. The system fixes this maximum number to 15.
Set a user name/password assigned to the PPTP/L2TP client by the
server. Username and password used when the PPTP/L2TP client is
connected to the PPTP/L2TP server.
The client is a network or host. When the PPTP/L2TP client is a network,
the LAN and mask of the PPTP/L2TP client must be set.
When the PPTP/L2TP client is a network, this item must be set. Set anIP
LAN of the PPTP/L2TP client.
When the PPTP/L2TP client is a network, this item must be set. Set a
remote subnet mask of the PPTP/L2TP client.
Description of this user. No description is displayed if it is not set when a
rule is set.
Perform the edit and delete actions on users.
- 58 -