Tenda G3 User Manual page 70

Device Management
4.5.4 Example of PPTP/L2TP configurations

Example: The headquarters and the branch use a G3 enterprise router to establish a network with successful
access to the Internet. Employees in the branch need to access the company's resources via the Internet at
any time. These resources include the company's internal data, office OA, ERP system, CRM system, project
management system, etc. Remote users can access the company's server by setting the VPN service on the
router. Take PPTP as an example. The setting method of L2TP is similar.
The reference topological graph is as follows:
Configuration steps:
Step 1: Set Router 1 that acts as a server.
Enable the "PPTP/L2TP Server" function.
❶ Status: Click Enable.
❷ Type: Click PPTP Server.
❸ WAN: Select an enabled WAN port of Router 1 (VPN server) (In this example, WAN0).
❹ Encryption: Click Enable to enable encryption.
❺ Click OK.
- 64 -