Device Management
Parameter
Line Bandwidth
Connection Status
4.2.2 WAN Parameters
If you cannot access the Internet after performing Internet setup, you can solve this problem by modifying WAN
parameters. Click『Network』>『WAN Parameters』 to go to the configuration page.
Configuration steps for MAC address clone:
❶
MAC Address: Click the dropdown list and select Clone Local MAC or Manual Input. Enter a MAC address to
be cloned in the MAC input box when selecting Manual Input MAC.
❷
Click OK.
Description
Handle the size of bandwidth. Consult a corresponding broadband operator.
Note
If this item is empty, it will affect the "Intelligent Bandwidth Control" and "Smart Load
Balancing" functions. Please fill in it.
Display the connection status of a WAN port. The states mainly include:
Connected or authenticated: The router has been successfully connected to the
Internet.
Connecting...: The router is being connected to the Internet.
Disconnected: Disconnection or connection failure. Please check Internet access
information or consult a corresponding broadband operator.
If other status information is displayed, take corresponding measures according to the
prompt message about connection status.
- 22 -