Step 2: Set Internet Access Parameters - Tenda G3 User Manual

Internet Access Setup

Step 2: Set Internet access parameters

Set Internet access information. Select one connection method from Methods 1, 2, and 3 according to actual
situations. Try to surf the Internet after settings are finished.
Click 『Network』 to go to the Internet Setup page.
Tip

This router provides 2 WAN ports by default. Take WAN0 settings as an example below. WAN1 port settings
are consistent with WAN0 port settings.

The default connection method of the router WAN0 is ADSL. The default connection method of WAN1 is
Dynamic IP.

All Internet access setting parameters are provided by the broadband operator. If you have any question,
consult your broadband operator.

If there is any prompt dialog box appearing in the setting process, take corresponding measures according
to the contents of the prompt dialog box.
- 13 -