Cpu On-Board Connectors; Cpu Bit Links (Jumpers) - Emerson FLOBOSS S600 Instruction Manual

FloBoss S600 Instruction Manual

3.4 CPU On-Board Connectors

The miscellaneous device connectors provided on the P152 CPU module are shown in Table 3-8. This
information is for identification purposes only. Do not modify these connections, unless told to do so by
the factory.
Table 3-8. Miscellaneous Device Connectors for the P152 CPU Module

3.5 CPU Bit Links (Jumpers)

The entries shown in boldface are the default configuration settings; these may not apply to your specific
configuration. This information is for identification purposes only. Do not modify these settings, unless
told to do so by the factory.
Rev Sep/04
Figure 3-4. Link Cable
Socket
J1 DIN Backplane Connector
J2 CPU cooling fan molex (12 VDC)
J3 PC/104 expansion bus (16- bit)
J4 Additional plug-in battery molex 3.6 V dc
J5 IDE Hard disk pin header
J6 Altera serial programming pin header (factory use only)
J7 Keyboard and mouse pin header
J8 Security bit link (Off = Level 1 Security Disabled)
J9 Optional communications LED backplate pin header
Description
CPU 3-8