Environmental Considerations; Required Tools For Installation - Emerson FLOBOSS S600 Instruction Manual

FloBoss S600 Instruction Manual

2.2 Environmental Considerations

The FloBoss S600 panel mount is designed for use within the control room and should be placed in a
position that provides ease of use, comfort, and safety for operators and maintenance personnel. The
optimum height for viewing and using the display and keypad is at operator eye level.
Where one or more units are installed in a confined space or with other heat producing
equipment, special attention should be given to the combined heating effect. This combined
heat could increase the environmental temperature beyond its acceptable threshold, thereby
impacting performance.

2.3 Required Tools for Installation

Before attempting any installation of the FloBoss S600 hardware, ensure you have the following tools:
♦ Small flat-blade screwdriver suitable for the slot headed captive screws on the rear of the case that
secure each plug-in board into the case.
♦ 5.5 mm (5 BA) hex or small adjustable crescent wrench for the front panel bosses.
♦ 2.5 mm Allen wrench suitable for the hex cap screw on the front face of the front panel to secure
the front panel molding to the case.
Rev Sep/04
Figure 2-1. FloBoss S600 System Components
Installation 2-2