Table of Contents
Advertisement
5. Repeat step 4 for the other end of the trough.
6. Proceed to install all screws, (2) front and (2) back through tab holes into EIA rail holes.
7. Install the (2) center screws to secure inner and outer trough members
Figure 4.3 Installing front-to-rear cable trough
ITEM
DESCRIPTION
1
Center screws
2
Trough assembly
3
Screws for tab holes in EIA rail holes
4
Trough tab engaged in rail cutout
5
Screws for tab holes in EIA rail holes
6
Outer trough assembly
7
Inner trough assembly
8
Screws for tab holes in EIA rail holes
9
Center screws
4.4 Adjustable Ladder-rack Bracket: ELRB016
The adjustable ladder-rack and basket-tray support bracket allows most third-party ladder racks or trays
to be installed on the top of DCE racks. The bracket accepts racks or trays of 12 in.,18 in. and 24 in. widths.
Height can be adjusted to accommodate the difference in height between racks. There are many
mounting holes in the top panel to accommodate the placement of the brackets. Two brackets are
recommended per rack.
Vertiv | DCE Installer/User Guide |
26
Advertisement
Table of Contents
