Table of Contents
Advertisement
3.6 Field-reversible Front and Rear Doors
The front and rear doors are installed right-hand hinged from the factory. To change to left-hand hinge,
follow door-removal instructions, "Door Removal and Attachment" on the previous page, then remove the
Torx screws that attach the hinges to the frame.
To re-install the hinges on the left side of the frame:
•
Use the former top-right hinge at the bottom left and the former bottom-right hinge at the top
left with the open end of the hinge facing the outside of the rack.
•
Using a T30 screwdriver, remove and re-install the catch plate on the opposing side with the
bend toward the inside of the rack.
•
Then rotate the door 180° and slide the hinge pins into the assembly.
•
When the door is reversed the handle must also be rotated 180°; see "Reversing the door
handle" on page 9.
Figure 3.3 Moving hinges to reverse doors
ITEM
DESCRIPTION
1
M6 Torx screw
Vertiv | DCE Installer/User Guide |
12
Advertisement
Table of Contents
