Table of Contents
Advertisement
4.6 Exhaust Chimney: E1832014/E3246014
The chimney top panel includes and opening for an exhaust chimney. The chimney options are:
•
E1832014: Adjustable 18 in. to 32 in. H; 18.75 in. W x 14.3 in. D
•
E3246014: Adjustable 32 in. to 46 in. H; 18.75 in. W x 14.3 in. D
To install the exhaust chimney:
1.
Place the chimney on top of the opening in the top panel and secure it from inside the rack
with four #10-32 x 1/2 in. L screws.
2. Raise the outer section of the chimney so the rubber seal touches the ceiling. When the
chimney is at the desired height, use a screwdriver to punch out the appropriate knockout
along each side of the chimney.
3. Insert the chimney knob into the knockout to secure the chimney.
Figure 4.6 Installing the exhaust chimney
ITEM
DESCRIPTION
1
Fully-extended chimney
2
Fully-compressed chimney
3
Knockouts for chimney knob
4.7 Vertical-airflow Baffle with Brush Kit
for 800-mm W Rack: E48801/E428014/E458014
The vertical airflow baffle with brush kit is used to prevent air recirculation within the rack. It can be
installed in 42, 45, and 48 RU racks that are 800-mm wide. The kit installs using the accessory mounting
holes (AMH) along the rail.
Vertiv | DCE Installer/User Guide |
29
Advertisement
Table of Contents
