Table of Contents
Advertisement
3 MAJOR COMPONENTS
DCF Optimized Rack System will have all of the components addressed in this section. All components are
finished with a textured powder coat, color is RAL 7021.
3.1 Frame
The DCF Optimized Rack System is constructed of hot and cold rolled steel. Frame is light weight and
strong with a 3000 lb static load rating.
3.1.1 Adjustable Rails
The DCF Optimized Rack System ships with 2 sets of 19-in. (EIA310-E) compliant rails. The 19-in. rails have
U marking labels on both sides of the rails. Front and rear mount rails are installed in the DCF at 29.13 in.
(740 mm).
3.1.2 Full-height Rack PDU/Cable-management Bracket
Each DCF rack leaves the factory with 2 full-height rack pdu/cable-management brackets installed. The
brackets are installed in the rear of the rack, flush against the frame, one bracket installed on each side of
rack.
3.1.3 Casters
DCF Optimized Rack System ships standard with 4 swivel, non-locking casters installed.
Figure 3.1 Caster plate
3.2 Enclosure
Exterior components of the DCF Optimized Rack System are finished in textured powder coat, color RAL
7021.
Vertiv | DCF Installer/User Guide |
9
Advertisement
Table of Contents
