Optional Accessories; Vertical Cable Manager Kit: E846015 - Vertiv DCE E42611 User Manual

4 OPTIONAL ACCESSORIES

This section describes options that may be included with your DCE rack(s), and their installation.

4.1 Vertical Cable Manager Kit: E846015

Installation of Vertical Cable Manager kit requires the EIA rails to be recessed a total of 4.75 in. from the
front of the rack.
When stalled in 700-mm and 800-mm wide racks, the vertical cable manger kit does not require AMH
adapter brackets. When installed in in 600-mm wide racks, AMH adapter brackets are required.
To install adapter brackets and cable manager on a 600-mm rack:
1. Align the bent tabs to the cut-out pattern on the outside surface of the EIA rail, and insert
them.
2. Install each adapter bracket with (14) panel fasteners.
Vertiv | DCE Installer/User Guide | 23