Important Safety Instructions - Vertiv DCE E42611 User Manual

1 IMPORTANT SAFETY INSTRUCTIONS

Save These Instructions
This manual is provided to prevent service personnel from committing an act that results in the risk of fire,
electric shock, or injury to persons. Only trained service personnel should receive, unpack, and assemble
the DCE Racks. In addition, only trained service personnel should install equipment in racks.
Improper handling and use of the DCE Rack could result in equipment damage, serious injury, or possible
death.
WARNING: Only trained service personnel should be used to remove the rack from the pallet. Also, be
sure you have a sufficient number of service personnel. Do not attempt to move racks by yourself.
WARNING: All wiring and electrical circuits must be in compliance with National and Local electric
codes. Only ITE (Information Technology Equipment) bearing the safety compliance mark of a NRTL
should be installed inside the DCE Rack. NRTL compliance marks include UL®, C-UL®, CSA®, ETL®,
TUV®, and CE.
WARNING: Be sure to read and follow all individual manufacturer equipment manuals for safety and
installation instructions.
WARNING: Proper spacing is required when installing electrical equipment to avoid electrical shock.
Maintain minimum spacing between the accessories and components and the computer rack assembly
for safe operation of the equipment when installed in accordance with the National Electric Code
ANSI/NFPA 70-1999.
Vertiv | DCE Installer/User Guide | 5