Parameter Backup; Up/Download; Figure 15: Parameter Backup; Figure 16: Up/Download - KEB COMBIVERT F6 series Instructions For Use Manual

OPERATION

5.7 Parameter backup

Inverter parameters
Operator parameters
Parameter backup

Up/Download

Work list
File administration
FTP mode
Start test mode
Figure 15: Parameter backup
5.8 Up/Download
Inverter parameters
Operator parameters
Parameter backup
Up/Download
Work list
File administration
FTP mode
Start test mode
Figure 16: Up/Download
30
ENTER opens the submenu for parameter backup.
Parameter backup (Upload) = F3
All inverter and operator parameters are read and saved in the
flash memory. Every new upload process overwrites the pre-
saved parameter lists.
Write parameter (Download) = F4
A download is not possible without saved inverter parameters →
error message!
ENTER opens the submenu for uploading and downloading.
Parameter backup (Upload) = F3
A download list is loaded from the current inverter and stored
under new name.
Write parameter (Download) = F4
An existing download list is stored in the inverter.
Parameter lists, created with COMBIVIS in .dw5 format can be
transmitted via ftp to the operator.