INTERFAcES
4 Interfaces
4.1 Operator interface
The interface fulfills the following functions:
• Communication with the F6 device. (Protocol DIN66019II)
• Voltage supply of the operator
A combined RS485 interface is used as interface, which is provided as 9-pole Sub-D
plug connector.
Figure 3:
The interface is not electrically isolated.
The operator can be operated from a distance with a 1:1 cable upto a maximum length
of 10 meters (depending on the cable cross-section).
14
1
2
3
4
5
6
7
8
9
Sub-D 9-pole