Diagnostic Interfaces; Ethernet Interface; Usb Interface; Figure 4: Rj45 Interface - KEB COMBIVERT F6 series Instructions For Use Manual

INTERFAcES

4.2 Diagnostic interfaces

4.2.1 Ethernet interface

The Ethernet interface emulates the diagnostic interface on the F6 device. DIN66019II
is used as protocol via TCP or UDP on port 8000 and KebFtp on port 8002. Additionally
it can be accessed to parameters / objects of the operator. The operator responds to all
node addresses.

4.2.2 USb interface

The USB interface emulates the diagnostic interface on the F6 device. DIN66019II is
used as protocol serial with any baud rate. Additionally it can be accessed to param-
eters / objects of the operator. The USB interface is electrically isolated.The operator
responds to all node addresses.
8
Figure 4: RJ45 interface
Figure 5: USB interface
1
15