Tester Operation; Starting The Tester; Stopping The Tester; Quitting The Tester - Polaroid PDC2000 Repair Manual

PDC 2000/3000 Repair Manual

Tester Operation

Starting the Tester

1. If applicable, click the mouse on the front panel white arrow to start the tester.
2. Click the mouse on the Start button to start the test sequence.
3. Tester prompts the user to perform specified function when testing the PDC 2000/3000
digital camera.
4. Once all user prompts are completed, the test sequence for the PDC 2000/3000 digital
camera begins.
5. Upon completion of all or partial tests, a test completed message appears in the Status box
of the test panel.
Also, a test report and the

Stopping the Tester

Note: The Tester should not be stopped in the middle of a test sequence. However, if an
emergency situation occurs, use the following steps to stop and restart the Tester.
1. Click the mouse on the stop
The black arrow changes to a white arrow indicating that the run-time version of LabView
stopped running.
2. To restart the Tester, just click the mouse on the white arrow; the arrow becomes black
again and the tester resumes.

Quitting the Tester

To quit the Tester due to a malfunction or before the selected tests are completed, just
click the mouse on the Closing box.
Pass / Fail indicators displayed on the test panel are updated.
box to completely stop the camera's test sequence.
17
Testing&Adjustment