Polaroid PDC2000 Repair Manual page 54

PDC 2000/3000 Repair Manual Testing & Adjustment
6. Initially jump start the focus wheel by manually moving it until it gets up to 40 and then let
go of it.
7. Once it stops stepping (approximately 53 steps), the Pin Me message appears.
8. Using tweezers or needle nose pliars, gently reinsert the red pin into the focus gear.
9. Once the red pin is inserted into the focus gear, click on OK.
10. Click on the Toward button to rotate the focus gear to its Home (start) position.
11.Click on the Away button to rotate the focus gear 2 or three steps from its home position.
12.Click on the Write it button to write the new focus information into the camera's EEPROM.
13.Close the camera.
55