Polaroid PDC2000 Repair Manual page 61

PDC 2000/3000 Repair Manual
4. Once the LabView VI test program is loaded, the Clean Sweep front panel appears.
5. Click on the Display Image button. This action allows the camera to automatically clean
sweep the camera.
Note: If you do not click on the Display Image button, the image of the
checker/resolution target will appear each time the camera cycles (takes a
picture). To continue the process, you must click on OK.
6. Click on the white run arrow. Arrow should change to black. The Erasing clock starts to
count down as each picture of the checker/resolution target is taken.
7. Once the Erasing clock counts down to zero, all pictures stored in camera memory have
been over written with a picture of the checker/resolution target.
62
Testing & Adjustment