PDC 2000/3000 Repair Manual
Problem
Poor Focus:
Note:
Before checking focus problems:
•
Take a 14" and a 4" picture. Look at distance measured - picture should
be in focus.
•
Listen for focus gear movement. Focus gear will not move if lens magnet is
missing or changed position. Camera will not Autofocus without lens magnet.
•
Listen for sonar firing.
•
Check focus for bushing, erratic curve, etc.
AutoFocus Button •
Distance
Measurement
Incorrect.
Focus Gear
(No Movement)
Focus Gear
(Grinding sound
when trying to
focus)
Guide 4-4. Image Quality
Cause
Set to Off.
•
Defective Autofocus.
PC board.
•
Defective Sonar
(Transducer )
•
Defective Front End PC
board.
•
Missing or incorrectly
positioned lens magnet.
•
Defective focus motor.
•
Damaged focus motor
flex.
•
CCD flex hitting focus
gear.
•
LCD tab hitting focus
gear.
77
Diagnostics and Troubleshooting
Corrective Action
•
Reset Autofocus to On.
•
Replace Autofocus
PC board.
•
Replace Sonar (Transducer).
•
Replace Front End PC board.
•
Replace or reposition lens
magnet.
•
Replace Optics Module
assembly.
•
Replace Optics Module
assembly.
•
Reposition CCD flex.
•
Reposition LCD tab.