PDC 2000/3000 Repair Manual
Guide 4-2. Power (Batteries and External Power Adapter/Trickle Charger) (Cont'd)
Problem
LCD Display Error Messages: (Cont'd)
18 H
40 H
Will Not Power Off
Will not Auto
Shut Off
Intermittent ON/OFF •
or
Incomplete Power Up
Cause
•
Damaged or disconnected
CCD flex (CCD to Front End
PC board.
•
Defective CCD.
•
Defective Front End PC
board.
•
Defective Shutter.
•
Defective Back End
PC board.
•
Defective Power Supply/
Strobe PC board.
•
Set incorrectly.
•
Big hose.
•
Defective Power Supply/
Strobe PC board.
Battery voltage low.
74
Diagnostics and Troubleshooting
Corrective Action
•
Connect or replace CCD flex.
(CCD to Front End PC board.
•
Replace CCD.
•
Replace Front End PC
board.
•
Replace Optics Module
assembly.
•
Replace Back End PC board.
•
Replace Power Supply/Strobe
PC board.
•
Verify shut off time with host
computer software. If
necessary, reset shut off time.
•
Run VI 1 or 2 times.
•
Replace Power Supply/Strobe
PC board.
•
Recharge batteries.
Connect power adapter/trickle
charger to battery charger
connection.
Note: The camera can be
operated while the
batteries charge once
a specified voltage is
reached.