Advertisement
HOW TO LOAD A FILM PACK: OPEN THE PACKAGE
OPERATION
A special request!
As soon as
you
open the film pack you
will begin
to
accumulate waste paper.
There
will
be more when you
develop the
pictures. We hope that
it won't become
litter
in
the streets or be scattered around
the landscape.
What
to
do with the waste paper?
Usually,
it will fit into
an empty
film box. Or, if
you're
planning
to take
lots of outdoor
pictures, bring along
a paper
bag or other
container for
waste. Everyone
will
appre¬
ciate this little
extra effort
on
your part.
Open the top of
the box. With color film there's a
set
of
mounts; with black and white film there's a
coater.
Remove
these and the
instruction
sheet (please read it). Pull out
the film package. Handle it gently, carefully. Save the box
to carry prints
in
safely.
It
also
can
be
very
useful
when
coating
black and white prints.
Hold the package near the edges. Don't press hard on the
middle
of the package. Starting at
the
corner,
tear open the
entire side of the package
along
the dotted line. When the
side is open, rip apart the front and back of the package.
Lift
out
the pack. Discard the moisture absorbing card
supplied
with color film. Handle the pack by the
edges only.
Always open
the
package
and load film in the shade,
not
in
direct sunlight, to avoid fogging the film.
220
15
Advertisement
