Polaroid PDC2000 Repair Manual page 72

PDC 2000/3000 Repair Manual
Guide 4-2. Power (Batteries and External Power Adapter/Trickle Charger) (Cont'd)
Problem
Power/Battery & Power Adapter/Trickle Charger: (Cont'd)
No Power Up
(Power supply
or Batteries)
LCD Display Error Messages:
STUCK_BTN
04 H
01 H
Cause
• Damaged or disconnected
flex (Back End PC board to
Power/Strobe PC board).
• Defective Power/Strobe
PC board.
• Defective Back End
PC board.
• Button not operating
smoothly.
• Defective Power Button
Board assembly.
• Defective Back End
PC board.
• System clock not
functioning correctly.
• Big Hose
• Power Off/On too fast.
• Poor connection between
Hard Drive and Back End
PC board.
• Defective Hard Drive.
(Hesitation, skip or
spinning sound)
• Defective Back End
PC board.
73
Diagnostics and Troubleshooting
Corrective Action
• Connect or replace flex (Back
End PC board to Power/
Strobe PC board).
• Replace Power/Strobe
PC board.
• Replace Back End
PC board.
• Reposition Power Button.
Board Assembly.
• Replace Power Button
Board assembly.
• Replace Back End PC board.
• Turn camera on and off to
reset system clock. If error
message does not clear,
replace Power Supply/Strobe
PC board.
• Run VI 1 or 2 times.
• Power Off/On slower.
• Reseat connection between
Hard Drive and Back End
PC board.
• Replace Hard Drive.
PDC-2000/60 -
• Replace Back End PC board.
60MB