Table of Contents
Advertisement
PDC 2000/3000 Repair Manual
Test Procedure
1. If applicable, enter user password.
2. Double click on the hard drive (HD) icon. The HD windows appears.
3. Double click on the Current Profile VI icon.
This action loads the specified LabView VI test program.
4. Once the LabView VI test program is loaded, the Cam Power New.VI panel appears.
5. Set the 1-ohm resistor box Manual/LV switch to Manual.
6. Turn on the digital camera under test.
Note: Make sure camera strobe is turned off.
21
Testing&Adjustment
HD Icon
Advertisement
Table of Contents
Troubleshooting
