Polaroid PDC2000 Repair Manual page 32

PDC 2000/3000 Repair Manual
22. Upon completion of the horizontal part of the focus calibration procedure, a prompt
appears indicating that the camera be setup for the vertical part of the focus calibration
procedure (Figure 3-6).
23. Flip down the checker/resolution target (Figure 3-6).
24. Slide the vertical (flatness) target over the checker/resolution target. Camera should be
aimed at vertical target (Figure 3-6).
25. Click on the Start button to automatically start the vertical part of the focus calibration
procedure.
Note: Follow all instructions that appear on the screen while the vertical part of the
focus calibration procedure runs. Click on the appropriate responses that appear
in the dialog boxes.
26. Upon completion of the vertical part of the focus calibration procedure, the screen
displays a panel indicating whether or not a particular calibration test passed (Pass)
or failed (Fail).
32
Testing&Adjustment