PDC 2000/3000 Repair Manual
14. Once the adjusted focus gear information is written into the camera's EEPROM, park the
camera as explained in the Park test.
15. Run the Fast Flatness test.
Note: Make sure that the peak values are changed to the current peak values before
running test.
16. Re-park the camera again.
17. Run the Peak Tweak test.
18. Re-park the camera again.
19. Re-run the Fast Flatness test.
Notes: •
If the Peak Tolerances/Location high point is at 42+\- 4, camera focus OK.
•
If the Peak Tolerances/Location high point is not at 42+\- 4, camera out of
focus, repeat Dime Store test procedure .
56
Testing & Adjustment