Operations
Seat Adjustment
Pull the blue Seat Height Adjustment
Lever(A) and move the Seat up or down
to desired position. Release and allow
the locking pin to click into place.
A
Final Inspection
After your Office Bike has been assembled, it is necessary to perform a final
visual inspection and test of features. Thoroughly look at the bike from all
angles. After visually checking your finished product, does anything look
out of place? If so, please review assembly instructions for those areas and
make needed adjustments. Next, confirm all bolts have been properly
tightened. Then test the adjustment of the seat, making sure it fully locks
in different selected positions. Check the pedals, inspecting for smooth
movement and normal function. If not, review Step 4 and make needed
adjustments before use.
18