Table of Contents
Advertisement
Step 4: Right and Left Pedal Assembly
A.
Identify which pedal goes on the right side and which goes on the left
side by locating the "R" on the back of the Right Pedal(6) and the "L" on
the back of the Left Pedal(5).
B.
Hand tighten the Right Pedal into the Right Crank Arm (R) by turning
clockwise.
C.
Hand tighten the Left Pedal into the Left Crank Arm (L) by turning
counter clockwise. Be careful not to cross thread the threads.
Tighten both pedals with the provided 15mm wrench. Fully tighten
D.
the pedals. This will prevent the pedals from getting loose and causing
damage to the crank threads.
NOTE:
Perform a weekly check
of hardware and pedals
to be sure everything is
remaining tight.
6
R
Office Bike Assembly Instructions
L
5
Multi-Wrench
13, 14, 15,
19 mm
15
Advertisement
Table of Contents
