LifeSpan Duo Owner's Manual page 10

Office Bike Assembly Instructions
Step 1: Attach Base Foot to Seat Slide Frame
A. Position Seat Slide Frame(1) on floor as shown in figure 1.
B. Remove the two pre-installed M8X45L Bolts, Lock Washers and Flat
Washers(10) from Seat Slide Frame(1).
C. Connect the Rear Base Foot(2) to the Seat Slide Frame(1) with the two
M8x15L Bolts, Lock Washers and Flat Washers (10). Fully tighten all
hardware.
1
12
2
10
M8X45L Bolts
Lock Washer
Flat Washer
5mm Allen
Wrench
M8 x 45L Screw
(x2)
PRE-INSTALLED