LifeSpan Duo Owner's Manual page 11

Step 2: Attach Drive System to Seat Slide Frame
A. Remove the four Phillips Head Screws(12) attaching the Seat Slide Frame
Base Cover (4) to the Seat Slide Frame(1) and remove the Cover.
Remove the two pre-installed M8x50L Bolts, Lock Washers, Flat Washers
B.
and Nuts(11) from the Seat Slide Frame(1).
C. Slide the Drive System (3) and the Seat Slide Frame(1) together and
connect with the M8x50L Bolts, Lock Washers, Flat Washers and Nuts(11).
Fully tighten all hardware.
D. Re-attach Seat Slide Frame Base Cover(4) with the four Phillips Head
Screws(12).
12
11
5mm Allen
Wrench
M8 x 50L Bolt
(x2)
PRE-INSTALLED
1
4
Phillip Head
Screws (x4)
PRE-INSTALLED
Office Bike Assembly Instructions
3
Use Socket
with
Allen Wrench
12
4
1
11
Nut
Lock Washer
Flat Washer
13