LifeSpan Duo Owner's Manual page 19

Step 1: Attach Top Plate to Main Post
(Countersink holes facing up)
A. Stand the Main Post on one end.
B. Remove the pre-installed screws from the
Main Post with the Allen Wrench.
C. Position the Top Plate on the Main Post
as shown, aligning the screw holes
countersink side up.
D. Attach the Top Plate to the Main Post with
the screws removed in Step 1B.
E. Flip over.
Attach Base Kit
Step 2:
A. Remove the
pre-installed screws from
the Main Post with the Allen
Wrench.
B. Position the Base Plate on the
Main Post aligning the screw
holes countersink side up.
C. Attach the Base Plate to the
Main Post with the screws
removed in Step 2A.
Table Assembly Instructions
Top Plate
5mm Allen
Wrench
Allen Head
Screws (x4)
PRE-INSTALLED
5mm Allen
Wrench
Allen Head
Screws (x4)
PRE-INSTALLED
21