Office Bike Assembly Instructions
Step 3: Attaching Front Base Foot to Drive System
A. Remove the two pre-installed M8X45L Bolts, Lock Washers and Flat
Washers(13) from Drive System(3).
B.
Connect the Front Base Foot with Pegs(9B) to the Drive System(3) with the
two M8x45L Bolts, Lock Washers and Flat Washers(13). Fully tighten all
hardware.
NOTE:
This fixed foot has
no casters and is
designed to lock into
the table base.
NOTE:
14
13
9A
9B
5mm Allen
Wrench
The Front Base Foot with Wheels (9A)
can be attached when the Office Bike
is not used with the LifeSpan Table.
*Table packaged separately. Table assembly
instructions included in table base box.
3
M8 x 45L Screw
(x2)
PRE-INSTALLED