Seat And Handlebar Adjustment - LifeSpan SM-800 User Manual

VI. SEAT AND HANDLEBAR
ADJUSTMENT
SEAT ADJUSTMENT
UP/DOWN
To adjust the seat height, hold onto the seat and pull the seat post up to your desired height.
To lower it you will need to pull the release lever underneath the seat up and while holding the lever,
push the seat down, then release the lever to lock into position.
CAUTION: We recommend to not sit on the seat when pulling up the release lever up as the
added weight can jam the release lever.
FORWARD/BACKWARD
The Adjusting lever under the seat acts like a Wrench.
To loosen:
Loosen the adjusting handle under the seat by turning it fully to the left side then pull the lever down
and move it back to the right side. Let go of the lever so it slots back into the bolt and then turn to the
left again. Continue doing this until the bolt is loosen enough for you to move your seat.
To tighten:
Once you have set the position you want, tighten by pulling the lever down and move it to the left side.
Release the lever until it clicks to the bolt and then turn the lever to the right.
Repeat by going back to the left side until the seat is fully locked into place.
HANDLEBAR ADJUSTMENT
To adjust the handlebar height, slacken the spring knob and secondary knob and pull both knobs back.
Slide the handlebar post along the housing on the main frame to the desired height and, with the holes
aligned correctly, tighten the spring adjusting knob and then the secondary knob.

SEAT AND HANDLEBAR ADJUSTMENT |

13