Grounding Instructions - Exerpeutic Workfit 1030 Owner's Manual

IMPORTANT SAFETY GUIDELINES

GROUNDING INSTRUCTIONS


This product must be grounded. If it should malfunction or break down, grounding provides a
path of least resistance for electric current reducing the risk of electric shock. * This treadmill
is equipped with a cord having equipment grounding conductor and a grounding plug.
The plug must be plugged into an appropriate outlet that is properly installed and
grounded in accordance with all local codes and ordinances.
DANGER:
risk of electric shock. Check with a qualified electrician, if you are in doubt as to whether the
product is properly grounded. Do not modify the plug provided with the treadmill. If it will not fit your
outlet, have a properly grounded outlet installed by a qualified electrician.
This product is for use on a nominal 120 volt circuit and has a grounding plug that looks like
the plug illustrated in sketch A in Figure 1.
Make sure that the product is connected to an outlet having the same configuration as the
plug. No adapter should be used with this product.

This unit must be plugged into a nominal 120 volt outlet which has been grounded.

Keep hands clear of all moving parts. Never place hands or feet under the treadmill while in it
use.

Do not use the treadmill on a carpet that is greater than 1/2 inch in height.

Before using the treadmill, check that the belt is aligned and centered on the walking deck and
all visible fasteners on the treadmill are sufficiently tightened and secure.
Improper connection of the treadmill grounding conductor can result in the
6