Hexagon Socket Head Cap Bolt - Exerpeutic Workfit 1030 Owner's Manual

Electric treadmill desk station

Hide thumbs Also See for Workfit 1030:

Table of Contents

ASSEMBLY

Tool:

5mm Allen Wrench with

Phillips Screwdriver

1PC

Left Table Hinge

Right Table Hinge

6. Installing the Hinges

Install both the Right/Left Table Hinges (79R/79L) to the right and left sides of the Handlebar

Support Tube Frame (75). Then attach the Table (64) onto both the Right/Left Table Hinges

(79R/79L) with four Hexagon Socket Head Cap Bolts (86). Tighten the bolts with the 5mm Allen

Wrench with Phillips Screwdriver provided.

7. Installing the Table to the Table Angle Adjustment Tube

Lift the Table Angle Adjustment Tube (68) up onto the Table Angle Adjuster (70) which is under

the Table (64). The angle of the Table (64) can be adjusted. There are 4 levels of incline for the

Table (64). After choosing your level of incline, secure the Table (64) in place by screwing in the

Knob (74). Place the Safety Tether Key (71) onto the Computer (72). If the Safety Tether Key

(71) is not placed onto the Computer (72), the unit will not operate.

Hardware:

(86) Hexagon Socket Head Cap Bolt

(74) Knob

4 PCS

1 PC

Table of Contents

Show Quick Links

Table of Contents