Table of Contents
Advertisement
Tool:
5mm Allen Wrench with
Phillips Screwdriver
1PC
2. Installing the Stabilizer Support Tube Covers
Lift up the Main Frame (1), and attach both Right/Left Stabilizer Support Tube Covers (76R, 76L)
onto the Stabilizer (57) using four Washers (88), four Self Tapping Screws (89). Tighten the Self
Tapping Screws (89) with the 5mm Allen Wrench with Phillips Screwdriver provided.
Hardware:
ASSEMBLY
(88) Washer
4 PCS
(89) Self Tapping Screw
4 PCS
13
Hide quick links:
Advertisement
Table of Contents
