Connection Setup Via Com1 Rs232 - Dranetz Encore Serirs 6100 System Installation Manual

Connection Setup via COM1 RS232

Connection Setup via COM1 RS232
Connect one end of the 9-pin RS232 connector into the COM1 RS232 port located on
Connection
setup via RS232
the rear panel of the 61000. Connect the other end of the RS232 connector to any
available serial COM port on your computer. The COM1 RS232 port can also be used
to connect optional external modem device, including cellular GSM.
RS232 connection is not operational at this time; future option.
NOTE
4-16