Table of Contents
Advertisement
As with the front panel, the 61000 rear panel display may also vary depending on the
Rear panel
input module/s installed.
Rear Panel for 61STD Unit - Configurable to Up to Four Input Module Combinations
61000 Standard (61STD) can accommodate up to four input modules with different
types of connectors. The modules installed on the rear panel are customized based on
user specifications. The rear panel consists of the input module connectors,
communication ports, and power switch. See below for description of a typical 61000
rear panel. Exact configuration is dependent on the optional input modules
ordered.
Dranetz-BMI recommends that you leave adequate working space for rear panel
Important
connections to the 61000. This rear clearance space is necessary for proper installation
of the measurement cables, probes and pods as well as external communications device
for the 61000.
Chapter 2/ Controls, Indicators, and Connectors
Input Modules
See Input Module Connectors, page 2-15
for a detailed description of the input
module connectors for 61STD
Communications Ports
See Communications Interface,
page 2-10 for a description of the
61000 data ports
SF-203
Power Input
See Connecting to AC Power
Source, page 2-7 on how to
power the unit on/off
Continued on next page
2-3
Advertisement
Table of Contents
