Table of Contents
Advertisement
Configuring the Encore 61000 DataNode for Modem Communication, continued
STEP 2: Set up the computer for modem communications.
Procedure
(continued)
Enable Internet
Protocol (TCP/IP)
4-8
2.1 Connect a "crossover" Ethernet cable (typically orange in color) from the
61000's RJ45 Ethernet port to the computer's Ethernet network port
2.2 From the desktop, select: Start > Control Panel > Network Connections.
2.3 Depending on the type of modem and other communication options in the
computer, a screen similar to the example below will appear. Right-click
on the Local Area Connection icon to display menu selection.
2.4 Select Properties in menu list to display the Local Area Connection
Properties screen shown below.
Local Area Connection icon
Click on
Properties
Continued on next page
Advertisement
Table of Contents
